unisonic technologies co., ltd tip36c pnp silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2005 unisonic technologies co., ltd qw-r214-014,a high power transistors description the utc tip36c is a pnp expitaxial-base transistor, designed for using in general purpose amplifier and switching applications. complement to tip35c internal schematic diagram (1) b (2) c e(3) to-3p *pb-free plating product number: tip36cl ordering information order number pin assignment normal lead free plating package 1 2 3 packing TIP36C-T3P-K TIP36C-T3P-K to-3p b c e bulk tip36cl-t3p-k (1)packing type (2)package type (1) k: bulk (2) t3p: to-3p (3)lead plating (3) l: lead free plating, blank: pb/sn
tip36c pnp silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r214-014,a absolute maximum ratings parameter symbol ratings unit collector-base voltage (i e = 0) v cbo -100 v collector-emitter voltage (i b = 0) v ceo -100 v emitter-base voltage (i c = 0) v ebo -5 v collector current i c -25 a collector peak current i cm -50 a base current i b -5 a total dissipation (tc =25
) p d 125 w junction temperature t j +150
storage temperature t stg -65 ~ +150
note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings onl y and functional device operat ion is not implied. thermal data parameter symbol min typ max unit thermal resistance junction-case jc 1 / w electrical characteristics (tc =25
, unless otherwise specified) parameter symbol test conditions min typ max unit collector cut-off current (i b = 0) i ceo v ce = -60 v -1 ma emitter cut-off current (i c = 0) i ebo v eb = -5 v -1 ma collector cut-off current (v be = 0) i ces v ce = rated v ceo -0.7 ma collector-emitter sustaining voltage (i b = 0) v ceo(sus) *i c = -30 ma -100 v i b = -1.5 a, i c = -15 a -1.8 v collector-emitter saturation voltage v ce(sat) * i b = -5 a, i c = -25 a -4 v v ce =-4 v, i c = -15 a -2 v base-emitter voltage v be(on) * v ce = -4 v, i c = -25 a -4 v v ce = -4 v, i c = -1.5 a 25 50 dc current gain h fe * v ce = -4 v, i c = -15 a 10 transition frequency f t v ce = -10 v, i c = -1 a, f = 1 mhz 3 mhz small signal current gain h fe v ce = -10 v, i c = -1 a, f = 1 khz 25 * pulsed: pulse duration = 300 s, duty cycle 2 % utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
